Technical Specifications

DESCRIPTION USES / BENEFITS DIRECTIONS FOR USE
VPI PRT Initial Surface Cleaner
is the second step in the overall
VPI PRT Flooring Initial
Maintenance System. VPI PRT
Initial Surface Cleaner, used in
conjunction with the VPI Initial
Surface Cleaning Pad (natural
in color, with black strands) –
micro-cleans the surface of the
tile resulting in a great visual
appearance and optimal
performance. It should be used
only after the PRT Initial Deep
Scrub process is completed.
• Extremely economical to use
• High activity
• Biodegradable
• Environmentally Safe
• Micro cleans & conditions
• Chemically seals tile
• Simple to use
• Works fantastic on PRT
PRECAUTIONS
SPECIFICATIONS
Color ....................Water White
Fragrance ......................... Mild
pH.....................................11.0
Coverage.....2,000 sq ft using
double application
KEEP OUT OF REACH OF CHILDREN.
See container and MSDS for further safety
instructions.
Toll Free: 800-874-4240 www.vpiflooring.com
EXTREME PERFORMANCE INITIAL CLEANSING AGENT
PRT Earthtones, simply the most durable & beautiful commercial floor on the market today.....
After first completing the PRT Initial
Deep Scrub process, place the VPI
Initial Surface Cleaning Pad
(natural in color, with black strands)
onto low speed floor machine. Mist
VPI PRT Initial Surface Cleaner,
using the mist setting on a trigger
sprayer, over the area to be cleaned.
With the low speed machine, use the
initial pass to evenly distribute the
cleaner over the intended area to be
surface cleaned (about a 10’x10’ area
at a time) – then begin buffing action.
Buff the area using an even back and
forth motion. Approximately 5 passes
per row should properly clean the
surface but take extra passes to
assure complete surface uniformity.
Continue the process until the surface
of the entire area has been cleaned
and is visually acceptable. If desired,
repeating Initial Surface Cleaning
process a second time will maximize
cleaning and appearance.
NOTE: It is very important to follow
the specific directions for cleaning
VPI PRT TILE. Treating it otherwise,
can negatively impact visual
appearance. IMPORTANT: Never
buff in excess of 375 RPM.
Item# 06601Q