SDS

Page 2 of 4 Revision Date: 6/1/2015
Polypropylene Glycol
25322
-
69
-
4
10
-
15%
Carbon Black
1333
-
86
-
4
10
-
15%
4.0 FIRST-AID MEASURES
4.1 Description of necessary first-aid measures:
Eye Contact: Remove contact lenses at once. Immediately flush eyes with large amounts of water or normal
saline for at least 30 minutes. Hold eyelids apart while flushing to rinse entire surface of eye and lids with water.
Skin Contact: Immediately flush skin with plenty of water for at least 15 minutes while removing contaminated
clothing and shoes. Call a Physician if irritation persists. Wash clothing before reuse. Contaminated Leather
Articles, including shoes, cannot be econtaminated and should be destroyed to prevent reuse.
Inhalation: Remove victim to fresh air if effects occur. If not breathing, give artificial respiration. Get immediate
medical attention.
Ingestion: Do not induce vomiting. If patient is conscious and can swallow, give two glasses of water (16oz.)
Get immediate medical attention. Never give anything by mouth to an unconscious or convulsing person.
4.2 Most Important symptoms/effects, acute and delayed:
Signs and Symptoms: Irritation as noted above. Skin sensitization (allergy) may be evidenced by rashes, especially
hives.
Aggravated medical conditions: preexisting skin and eye disorders may be aggravated by exposure to this product.
Preexisting skin and lung allergies may increase the chance of developing increased allergy symptoms from exposure
to this product.
Other Health Effects: Based on animal studies, repeated exposure to components of this product may cause damage
to liver, kidney, and respiratory systems. Reports have associated repeated and prolonged occupational exposure to
solvents with permanent brain and nervous system damage. Intentional misuse by deliberately concentrating and
inhaling vapors may be harmful or fatal.
4.3 Indication of immediate medical attention and special treatment needed, if necessary: Contact a poison control
center for additional treatment information. As a precaution, exposure to liquids, vapors, mists, or fumes should be
minimized.
5.0 FIRE-FIGHTING MEASURES
5.1 Suitable extinguishing media: Use alcohol type foam, dry chemical, or CO2.
5.2 Specific hazards arising from the chemical: Flash Point is 299� F TCC. None Known.
5.3 Special protective actions for fire-fighters: Use water spray to cool fire Exposed surfaces and to protect personnel.
If a leak or spill has not ignited, use ER spray to disperse the vapors. Contain the runoff stream. Try to cover liquid
pills with foam. Do not enter confined fire space without full bunker gear (helmet with face shield, bunker coats,
gloves, and rubber boots), including a positive pressure IOSH approved self contained breathing apparatus.
6.0 ACCIDENTAL RELEASE MEASURES
6.1 Personal precautions, protective equipment and emergency procedures: Ventilate the area. Avoid breathing
vapor. Use self-contained breathing apparatus or supplied air for large spills or confined areas.
6.2 Methods and materials for containment and clean up: Contain spill if possible. Wipe up or absorb on suitable
material and pick up with shovels. Do not use sawdust, wood chips, or other cellulosic materials to absorb the spill.
Prevent entry into sewers and waterways. Dispose of in accordance with federal, state, and local regulations.
7.0 HANDLING AND STORAGE
7.1 Precautions for safe handling: Ground all transfer equipment. Take precautionary measures against static
discharge. Handle as an industrial chemical.
7.2 Conditions for safe storage, including any incompatibilities: Ground all transfer equipment. Take precautionary
measures against static discharge. Handle as an industrial chemical. Keep container tightly closed when not in use.
Practice good caution and personal cleanliness to avoid skin and eye contact. Hold bulk storage under nitrogen
blanket. Store in a cool, dry place with adequate ventilation. Keep away from open flames and high temperatures.
8.0 EXPOSURE CONTROLS/PERSONAL PROTECTION
8.1 Control parameters
Component
CAS No.
Percent
Exposure Limits
Source
Po
ly
amine Adduct
P
ROPRIETARY
60
-
70
None established
TriethyleneTetramine 112-24-3 <5 None established