SDS

Page 3 of 4 Revision Date: 6/1/2015
Respiratory Protection: Provide adequate ventilation. Avoid breathing of vapors or mists. Airborne
concentrations should be kept to lowest levels possible. When exposures are not adequately controlled, use an
approved respirator. Selection of air-purifying or positive-pressure supplied air will depend on the specific operation
and the potential airborne concentration of material. For emergency conditions, use an approved positive-pressure
self-contained breathing apparatus.
Protective Clothing: Protective clothing such as uniforms, coveralls, or lab coats must be worn. Launder or dry-
clean when soiled. Gloves and goggles resistant to chemicals and petroleum distillates required. When handling
large quantities, impervious suits, gloves, and rubber boots must be worn.
9.0 PHYSICAL AND CHEMICAL PROPERTIES
9.1 Appearance (physical state, color, etc.): brown paste
9.2 Odor: amine
9.3 Odor threshold: N/A
9.4 pH: N/A
9.5 Melting point/freezing point: N/A
9.6 Initial boiling point and boiling range: not determined
9.7 Flash Point: >340� F TCC
9.8 Evaporation rate: not determined
9.9 Flammability (solid, gas): N/A
9.10 Upper/lower flammability or explosive limits: N/A
9.11 Vapor pressure: not determined
9.12 Vapor Density: not determined
9.13 Relative density (specific gravity): 1.023
9.14 Solubility(ies): not soluble (water)
9.15 Partition coefficient; n-octanol/water: N/A
9.16 Auto-ignition temperature: N/A
9.17 Decomposition temperature: N/A
9.18 Viscosity:
10.0 STABILITY AND REACTIVITY
10.1 Reactivity: N/A
10.2 Chemical stability: Excess heating over long periods of time degrades the resin.
10.3 Possibility of hazardous reactions: Will not occur by itself.
10.4 Conditions to avoid: Avoid exposure to heat, light, flame, or other sources of ignition. Can react vigorously with
strong oxidizing agents.
10.5 Incompatible materials: N/A
10.6 Hazardous decomposition products: Hazardous combustion products may include intense heat, dense black
smoke, carbon monoxide, carbon dioxide, as well as organic compounds of unknown structure.
11.0 TOXICOLOGICAL INFORMATION
11.1 Likely routes of exposure: N/A
11.2 Symptoms related to the physical, chemical and toxicological characteristics:
Eye Contact: Irritating and will injure eye tissue if not removed promptly.
Skin Contact: May cause irritation. Has been known to cause allergic skin reaction in humans. Prolonged contact
may cause blisters.
Inhalation: High vapor concentrations are irritating to the eyes and respiratory tract, may cause headaches and
dizziness.
Ingestion: Oral toxicity is considered to be extremely low.
11.3 Delayed and immediate effects and also chronic effects from short and long term exposure: N/A
11.4 Numerical measures of toxicity:
Ingredient Name
CAS No.
%
Acute Oral LD50
Acute De
rmal
LD50
Acute Inhalation LC50
Polyamide Resin
proprietary
65
-
75
>2
.0 g/kg
>2.0 g/kg
Not available
Miscellaneous, Non
-
hazardous
Inert Fillers
N/A 35-45 Not available Not available Not available