User manual

5
5) “GLOBAL SETUP”: ”: In this panel there are global settings for the
device. In this vPed software release the panel proposes the
following parameters:
 " Aux input volume” to adjust the level of the audio source
connected to the mini jack connector available in the vPed’s left
panel
 “Headphones volume” of course, to adjust phones output level
 “Sample rate” to set the internal processing of the signal at 44.1
kHz or 48 kHz
 “Current skin” to set the to set the background graphic
6) “UTILITY” This panel provides several functions:
“INSTALL EFFECTS”* To install plugins or transfer data. The
argument is detailed later in this document.
“UNINSTALL EFFECTS”* To uninstall plugins. The argument is
detailed later in this document.
“MANAGE BOARDS” To delete or rename previously saved boards.
“BACKUP DATA” To create a safe copy of the user data. Insert a
USB storage data device then activate the function by pressing "PAGE
/ ENTER". The backup will start automatically, and a notification
message to warn you when the task is finished. Duration of the
operation depends on the amount of data to be processed.
Notes about “BACKUP DATA” function:
In the USB device where a backup is performed must be available at least twice the free space than the data space occupied
in vped (see info).
The backup includes all data entered by the user.
Name of the loaded plugin
The top displays the graphical part of
the individual loaded plugins, making
the identification easier
Adjusting the input source based on the used inputs
(Jack / XLR). In a normal chain of effects, the input
comes from the previous output effect (PREVIOUS),
however it's possible to manage different audio
sources, for example in case you want to use
simultaneously effects for guitar, keyboard and/or
voice. It's possible that this type of "multi-use" requires
a lot of resources, so to get an adequate sound quality,
it is recommended not to over load available resources.
MIDI signal source. You can select the following
parameters:
“MIDI IN”: The plugin, presumably a VSTi,
receives messages from a MIDI controller
connected via MIDI (not included) , e.g. a MIDI
keyboard
“The plugin name”, if able to detect MIDI
messages
“-“ No one MIDI input
Note: If a plugin recognize to specific MIDI
control will be possible set it as the source. This
adjustment is indispensable if are used plugins
that detect and convert the analog signal into
MIDI messages to be sent to a VSTi loaded in a
different slot of vPed
By pressing this button you access to a screen
related to options about the loaded board:
"One pedal at a time", which allows you to set
the activating plugin mode, where activating a
plugin the previously loaded is automatically
disabled. This operation mode may be indispensable using
VSTi controlled by an external controller, in order to activate
a plugin at a time, or in the use of plugins, e.g. for guitar /
bass, providing complete sound set (amp + cab simulator
and effects). Note that the parameter is saved for single
board. "BACK" to return to the previous screen.
"Load the program while scrolling the list",
which enables (YES) or disables (OFF) the auto-
loading of programs (presets) that may be saved
by the user or pre-existing ones.
“Audio output” allows to adjust the audio output
to Stereo or Mono mode, or to get separate
outputs for Guitar and Mic inputs.
To go back
to the
previous
screen