User manual

Displays the second group of plugins assigned in positions from 5 to 8

Pressing down for at least one second the footswitch "PAGE / ENTER", you will access the screen where several functions are

available :

Scroll, with the help of the pedal buttons corresponding arrows on the bottom left, the various panes, and press "PAGE / ENTER" to

enter in the corresponding panel. Alternatively, you can use left button of the supplied mouse, or type ENTER on the keyboard (not

supplied) if it's connected.

1) “TUNER”: To access the Guitar/Bass tuner.

BACK to return to the the board screen.

2) “LOAD BOARD”: To access the panel where you can

choose and load a previously saved board. For BOARD

means the set of up to 8 loaded. Scroll the board list with the

help of the footwitches corresponding to the arrows at the

bottom left of the screen (useful mode during live

performances), or by using the VALUE dial, in the right side

of the front panel of vPed

3) “SAVE BOARD”: To save the loaded board. Subsequently the selection, the page where you can type the name for the board will

be displayed. Inserting of characters is also possible by a connected computer keyboard (not included).

Note: Board settings are recorded even when the power is turned off, as long as another board is loaded. In this case, remember to

decide whether to save the board or not. vPed, however, when loading another board, the system will ask you whether to save the

loaded one or not.

4) “BOARD SETUP”: ”: In this panel there are important global settings that require more detailed settings. The regulations are made

to complete the vPed configuration, according to the mode of use.

To select a specific parameter, use the usual buttons that correspond to the arrows displayed in

the bottom left.

Parameters will scroll for both the first 4 as well as for the remaining 4 slots, allowing adjustment of all 8 available plugins.