User manual

10
If the expression pedal reacts in reverse, so the minimum value is set with pedal up, reverse adjusting values. Consequently,
the "Min" will correspond to the maximum value and "Max" to the minimum value.
If you notice that the pedal does not cover the entire range of values, proceed as follows:
With the pedal connected, move the box minimum ("Min") and put the pedal to the position of minimum value. Do the same for
the maximum value ("Max"). In this way vPed properly adjusts the values of any expression pedal.
Notes on editing the plugins parameters:
In the edit screen of a plugin, as already mentioned,
VALUE knob adjusts the plugin output level, but
activating “MOVE” mode, by pressing the corresponding
button, you will be able to shift a plugin from one slot to
another, changing and adapting the chain effects order to
your needs. While moving,
will be highlighted by the defined graphics, while the
other plugin/s will remain displayed with the
Coming out of this screen, the “MOVE” mode will
automatically disable
Loading the same plugin in two adjacent slots, the plugin is actually instantiated only once and the two adjacent slots can be
useful only if each one has a different program (preset) selected. The activation remains exclusively for slot, but the function to
move plugins loaded 2 times within the chain of effects is inhibited.
When you are in the editing screen of a plugin, pressing the "PAGE / ENTER" button once will report directly to the main board
window.
When in the plugin edit screen, press the button "PAGE /
ENTER" once, the saving of the program (preset) that has
been edited, will be proposed.
Also note that when a program parameter is changed,
vPed will add the asterisk character “ * ”, to record the
change made, and the eventual saving will be performed.
The same symbol will be displayed as a suffix to the name
of a board if modified, to record that adjustments were
made. It will then be the user's choice whether or not to
save the changes. For the user, are 32 pre save settings (user presets).
Press "PAGE / ENTER" to enter the screen that allows you to enter the preset name.
In "SAVE PARAMETERS EFFECT" screen, there are up to
10 characters for the name available, by using the buttons
corresponding to those shown at the bottom of the screen,
and the VALUE knob to select the character. The left and
right arrows and "Backspace" to manage the placement of
characters. Typing can however also be made using a
computer keyboard (not included), connected to one of the
available USB ports on the left side of vPed. Inserted
character, press "PAGE / ENTER" to confirm saving.
“BACK”, of course to return to the previous screen.
Pressing and holding the MOVE for at least 1 sec., you will go to the screen that allows you to rename, delete or change the order
of user presets list. Of course the BACK button is available to go back to the previous screen.
veiled graphic.
only the selected effect