Specifications

Module name = Single triode
Description = This module contains a single triode tube with no lters, with a level adjust ment before and
after the tube. Using a couple of these in a series is like building your own amp!
Tweaking modules
One of the most powerful features of ReValver
™
MK III.V is the ability to tweak each parameter of a module other than the
usual knobs and buttons on the front of the module. In an eort to explain the Tweak mode in ReValver, we’ve written
some short explanations of each tweak option in the tube tweak GUI.
It takes years to learn tube amplier engineering, so the awesome “tweakability” of ReValver MKIII.V will keep even the
most experienced valve amplier engineer busy for hours. Users who don’t have any experience with tube amps can use
ReValver to learn about how tube ampliers work.
Press the “+” but ton on the module, or select “Tweak Module” on the module menu to bring up the general Tweak GUI.
The Tweak GUI is a general GUI that holds specialized tweakable components that dier from module to module. Some
features include Frequency Analyzer, Oscilloscope, Total Harmonic Distortion analysis and save Impulse Response.
The Frequency Analyzer runs a frequency response test of the module in question. It does so by inserting a
short “pulse” and performing a FFT (Fast Fourier Transform) frequency analysis of the out put. Please note that
such techniques may not yield expected results in non-linear modules such as distortion modules. The Fre-
quency Analyzer also accurately displays the phase response of the module. The analyzer window is displayed
in logarithmic mode with the lower frequency shown in high resolution. This emphasis can be adjusted via
the slider at the bottom of the window.
41