Specifications

Product Activation and Authorization
When ReValver
™
is installed, it defaults to “demo” mode until activated with a valid ReValver serial number.
Everytime you start ReValver you will be asked if you wish to activate or continue in demo mode. Click on the
“Yes” button to begin the activation process.
The next screen provides details into the product activation process. If you do not yet have a ReValver serial
number, this screen also provides a link to the ReValver web site, where ReValver serial numbers can be
purchased. If you have a serial number, click the “Next” button.
All ReValver serial numbers are associated with a hardware component on your computer. Upon activation,
that serial number is registered along with that hardware component. The following screen reects the
hardware component that will be used during the activation. To proceed, click the “Next” button.
4