Specifications

Module name = M-998
Description = This simple power amp uses 2 triodes in series for extra gain, and also uses a pair of tonal
character lters that can be tweaked in the Tweak GUI.
Module name = Standard Power Amp #2
Description = This power amp has a standard push-pull end stage, but is not driven by the usual Long Tail Pair
(LTP). It does have a “clean” switch for less drive and slightly dierent tonal char acter.
Module name = ‘62 BluesMaker power amp
Description = This power amp is taken directly out of the ‘62 BluesMaker. It has a drive and pres ence control,
and has a standard Negative Feedback Loop (NFB) to which the presence control is attached. The NFB shapes
the distortion character of the power stage.
Module name = Basic power amp
Description = This power amp is taken directly out of the Basic 100. Just like the original amp, the power
section has only a master control. The Negative Feedback Loop (NFB) shapes the distortion character, and can
be adjusted in the Tweak GUI. For an explanation of the Tweak GUI, see page 41.
Module name = ACM 900 power section
Description = This power amp is taken directly out of the ACM 900.
Module name = Flathill power section
Description = This power amp is taken directly out of the Flathill.
30