MSDS

- 437 -

531 Mixtures having a flash-point below 23 °C and containing more than 55%

nitrocellulose, whatever its nitrogen content or containing not more than 55%

nitrocellulose with a nitrogen content above 12.6% (by dry mass), are substances of

Class 1 (see UN Nos. 0340 or 0342) or of Class 4.1.

532 UN No. 2672 ammonia solution containing not less than 10% but not more than 35%

ammonia is a substance of Class 8.

533 UN No. 1198 formaldehyde solutions, flammable are substances of Class 3.

Formaldehyde solutions, non-flammable, with less than 25% formaldehyde are not

subject to the requirements of ADN.

534 While in some climatic conditions, petrol (gasoline) may have a vapour pressure

at 50 °C of more than 110 kPa (1.10 bar) but not more than 150 kPa (1.50 bar) it is to

continue to be considered as a substance having a vapour pressure at 50 °C of not

more than 110 kPa (1.10 bar).

535 UN No. 1469 lead nitrate, UN No. 1470 lead perchlorate, solid and UN No. 3408 lead

perchlorate, solution are substances of Class 5.1.

536 For naphthalene, solid, see UN No. 1334.

537 UN No. 2869 titanium trichloride mixture, not pyrophoric, is a substance of Class 8.

538 For sulphur (in the solid state), see UN No. 1350.

539 Solutions of isocyanates having a flash-point of not less than 23 °C are substances of

Class 6.1.

540 UN No. 1326 hafnium powder, wetted, UN No. 1352 titanium powder, wetted or

UN No. 1358 zirconium powder, wetted, with not less than 25% water, are substances

of Class 4.1.

541 Nitrocellulose mixtures with a water content, alcohol content or plasticizer content

lower than the stated limits are substances of Class 1.

542 Talc containing tremolite and/or actinolite is covered by this entry.

543 UN No. 1005 ammonia, anhydrous, UN No. 3318 ammonia solution with more than

50% ammonia and UN No. 2073 ammonia solution, with more than 35% but not more

than 50% ammonia, are substances of Class 2. Ammonia solutions with not more than

10% ammonia are not subject to the requirements of ADN.

544 UN No. 1032 dimethylamine, anhydrous, UN No. 1036 ethylamine, UN No. 1061

methylamine, anhydrous and UN No. 1083 trimethylamine, anhydrous, are substances

of Class 2.

545 UN No. 0401 dipicryl sulphide, wetted with less than 10% water by mass is a

substance of Class 1.

546 UN No. 2009 zirconium, dry, finished sheets, strip or coiled wire, in thicknesses of

less than 18 μm, is a substance of Class 4.2. Zirconium, dry, finished sheets, strip or

coiled wire, in thicknesses of 254 μm or more, is not subject to the requirements of

ADN.