User`s guide

Index
IN-2
5100-A2-GB21-00
November 1996
L
LEDs, 1-2, A-1
CD, 2-8
during installation, 2-8
during loopbacks, 3-4
LNK, 2-8
SYS, 2-9
Line Speed, changing, 2-14
Line Speed (ADSL), setting, 2-14
Link Status, 3-3
Local Loopback Test, 3-4
failed, 3-4
failed during installation, 2-18
running, 3-4
setting options, 3-5
window, 3-4
M
MAC Address, 2-9, 3-2
incorrect, 2-18
viewing, 2-17
N
NAS Card
operating environment, C-1
power consumption, C-1
status, 3-3
Network
access point, 2-8
driver, installing, 2-9
interference, 2-2
status, 3-3
P
Packet
count, 3-5
size, 3-5
transmissions, 3-3
Pin Assignments, 1-2, B-1
Protocol.ini File, 2-15
Protocol.ini Path
saving path, 2-16
setting path, 2-15
window, 2-15
R
RADSL (Rate Adaptive Digital Subscriber Loop), 1-2
RAM Requirements, 1-3
Recommend Base Address, 2-12
window, 2-3
Remote Loopback Test, 2-18, 3-4
failed, 3-4
failed during installation, 2-18
running, 3-4
setting options, 3-5
window, 3-4
Reset Card, 3-2
S
Saving, configuration settings, 2-16
Security, 1-2
Self-Test, 2-9
fails, 2-9
SETUP.EXE, 2-2
Statistics
byte transmissions, 3-3
CRC errors, 3-3
packet transmissions, 3-3
viewing, 3-3
window, 3-3
Switch Settings, changing, 2-13
System Messages
Card Busy, 3-3
Card Ready, 3-3
Card Timeout, 3-3
User Packets Enabled, 2-18
System Requirements
hardware, 1-3
software, 1-3
T
TCP/IP
installing, 2-10
Protocol.ini file, 2-15
version, 1-3
Troubleshooting, 2-18