Specifications

16
SET-UP
Enter the existing load cell size.
Enter weigh chamber size calculated from CUBIC/FT X 35lb.
Set the mixer timer from 0 to 60 sec per cycle.
Set the weigh chamber dump time depending on maximum quantity of regrind in the recipes from 1 to 20 sec.
Set maximum stability depending on the vibration of the floor from 1 to 10.
Press EXIT to return to the Main screen or
Press MORE to get to the next screen.
Fig. 15
Change to YES if there is the holding tank below the mixer barrel.
Change to YES if you want to run the blender when regrind is going below the low level and ignore the regrind until level will not
be above.
Leave Control Mixer Motor NO if you want mixer running continuously.
Change to YES if you want to create recipes by %.
Press EXIT to return to the Main screen or
Press MORE to get to the next screen.
Fig. 16
Set slow speed points for each possible component.
Slower speed – more accurate feed, but longer filling time.
Press EXIT to return to the Main screen or
Press MORE to go to the first setup screen.