User`s guide

v
5100-A2-GB20-00
November 1996
About This Guide
Purpose and Audience
This guide describes how to install and configure the Central Office (CO)
component of the HotWire 5100 DSL Access System. The guide is written for
administrators and technicians who maintain the networks that support HotWire
DSL operation.
To install and configure the Customer Premises (CP) portion of the HotWire DSL,
refer to the
HotWire 5100 DSL Access System Customer Premises User’s Guide .
Document Summary
Section Description
Chapter 1 About HotWire DSL. Provides an overview of the
operation of the HotWire DSL and lists its hardware
and software requirements.
Chapter 2
Installing and Connecting the Card. Describes how to
install the HotWire DSL hardware and software.
Chapter 3
Accessing the Central Management Utility. Describes
how to access the HotWire DSL Central Management
Utility to configure and manage the CO PC card.
Chapter 4
Configuring and Managing the Card. Describes how to
configure and manage the CO PC card.
Chapter 5
Configuring the SNMP Agent. Describes how to
configure the SNMP Agent.
Chapter 6
Diagnostics. Describes the meaning of the LEDs on the
CO PC card and how to use the HotWire DSL loopback
tests.
Appendix A
Pinouts. Provides pinouts for the CO PC card.