User`s guide

Configuring the SNMP Agent
5-3
5100-A2-GB20-00
November 1996
Up to four destination addresses may be entered. If no destination addresses are
entered, no traps will be transmitted.
Use the following procedure to configure the IP address(es) of the SNMP
management station(s) that manage this CO PC.
 Procedure
1. Start the HotWire DSL SNMP Agent utility by clicking on its icon.
2. Select Traps→Destination from the menu.
3. Fill in the IP address(es) of the SNMP management system(s) to which you
want the SNMP agent to send traps.
4. Click OK.
PDU Trace
You can send a hexidecimal trace of the PDUs sent and received by the CO PC
to the screen or to a file.
Use the following procedure to send a trace to your screen:
 Procedure
1. Start the HotWire DSL SNMP Agent utility by clicking on its icon.
2. Select Options→Dump Packets from the menu.
A hexidecimal trace is sent to the screen.
To stop a trace, reselect Options→Log Receipt
.
Use the following procedure to send a trace to a file:
 Procedure
1. Start the HotWire DSL SNMP Agent utility by clicking on its icon.
2. Select Options→Log Receipt from the menu.
3. Select a file name to receive the trace.
A hexidecimal trace is sent to the file.
To stop a trace, reselect Options→Log Receipt
.