User`s guide

Configuring and Managing the Card
4-10
5100-A2-GB20-00
November 1996
Firmware Upgrade
The Firmware Installation screen enables you download code into the firmware of
the CO card.
Firmware Upgrade
Parameter
Description
Channel Number User-supplied number that identifies the channel. (See
Setting I/O Base Address in Chapter 2.)
CO Firmware Version Current firmware version.
Firmware Filename Filename containing the code to be downloaded.
Start Firmware Download Type Y(es) and press Enter to begin the download; Type
N(o) and press Enter to cancel the download.
Set Filters
The Filters screen enables you to select the filter operation of the CO card.
Filters Display (1 of 2)
Parameter
Description
Channel Number User-supplied number that identifies the channel. (See
Setting I/O Base Address in Chapter 2.)
MAC Filter Source Address Used to filter the data sent from the CO card to the
CP card. The CO card sends only those packets to its
attached CP card that have a source MAC address that
matches one of the addresses in its filter table.
Filtering MAC source addresses provides security benefits
by keeping users separate from one another on the LAN
segment.
You can configure up to 4 addresses. Use the left and
right arrow keys to scroll through these addresses.