User`s guide

Accessing the Central Management Utility
3-3
5100-A2-GB20-00
November 1996
3. From the PC keyboard, type:
cd c:\HOTWIRE
hotwire.exe
Alternatively, follow the procedure described in
Automatically Running the
Central Management Utility
on page 3-5.
4. Read Chapter 4,
Configuring and Managing the Card .
Accessing the Central Management Utility Using
Telnet
The procedure that follows describes how to use a TCP/IP system to access the
central management utility via telnet.
 Procedure
1. To open a telnet session to the CO PC, type:
telnet <IP address of CO PC>
2. Type:
cd c:\HOTWIRE
hotwire.exe
3. Read Chapter 4,
Configuring and Managing the Card .
NOTE:
When using telnet, press the Esc key twice whenever the central
management utility requires that you press the Esc key.