User`s guide

iii
5100-A2-GB22-00
December 1996
About This Guide
Purpose and Audience
This guide describes how to install and run diagnostics on the 5170 Remote
Termination Unit (RTU). The guide is written for users of the HotWire DSL (Digital
Subscriber Loop) access system.
Guide Summary
Section Description
Chapter 1 About HotWire. Provides a high-level overview of the
operation of the HotWire and lists its hardware and software
requirements for installing the card in the PC.
Chapter 2
Installation. Describes how to install the RTU and Diagnostic
Utility.
Chapter 3
Using the HotWire Diagnostics Utility. Describes how to use
the HotWire Diagnostics Utility.
Appendix A
LEDs. Provides the LED descriptions.
Appendix B
Pin Assignments. Provides the pinouts for the card.
Appendix C
Technical Specifications. Provides the specifications for the
RTU.
Glossary Defines acronyms and terms used in this document.
Index Lists key terms, acronyms, concepts, and sections in
alphabetical order and provides page references.