User`s guide

Using the HotWire Diagnostics Utility
3-12
5100-A2-GB22-00
December 1996
Downloading Firmware
Use the following procedure to download firmware updates from a disk or virtual
hard drive.
 Procedure
To download firmware:
1. Select Download Firmware from the
Configuration menu on the Diagnostics
Utility main menu.
The Open window appears. This
window uses standard Windows user
interface conventions.
Notice that the Open
window may look
slightly different on a
Windows 95 system.
2. Select the appropriate
drive (for example,
drive a:) as shown on
the sample Open
window. (It is
recommended that
you copy the update
file to your hard drive and then download. Downloading from the a: drive is
significantly slower than downloading from the hard drive.)
3. Select the file.
4. Click on one of the following:
— OK to accept the parameters and return to the main menu.
— Cancel to close the window without downloading firmware and return to
the main menu.
Exiting the Utility
To quit the Diagnostics Utility, select Exit from the File menu.