User`s guide

About HotWire
1-3
5100-A2-GB22-00
December 1996
Equipment and Software Requirements
Verify that you have the following hardware and software before installing the
RTU.
Hardware Requirements
 80486 (or higher) IBM PC or compatible
 8 MB RAM minimum (16 MB RAM recommended)
 One 1.44 MB, 3 1/2″ diskette drive (for installation)
 2 MB free disk storage (for program files)
Software Requirements
 DOS 5.0 or later
 Windows 3.1 (or later) and TCP/IP application with IP stack NDIS 2.01
compliant or Windows For Workgroups 3.11 (or later) or Windows 95
HotWire 5170 RTU Diagnostics Utility
Use the HotWire Diagnostics Utility supplied with the RTU for running diagnostics
and tests for troubleshooting the unit or downloading firmware. The Diagnostics
Utility provides screen help in standard windows format. Refer to Chapter 3,
Using the HotWire Diagnostics Utility, for more information on this utility.
User Interface
The Diagnostics Utility uses standard Windows user interface conventions for all
windows including Help screens.