Installation guide

Acme Packet 6100 Hardware Installation and Maintenance Guide 85
Removing Hardware in
Center-Mount
Configurations
The rack ears must be removed before you can open the chassis.
Figure 2 - 33 Left rack ear.
To remove center-mount equipment rack hardware:
1. Remove the left rack ear by using a #1 Phillips-head screwdriver.
2. Remove the right rack ear by unscrewing the three screws.
3. Set the rack ears and screw
s aside.
Removing Hardware in
Fr
ont-Mount
Configurations
The chassis slides and rack ears must be removed before you can open the chassis.
To remove front-mount equip
ment rack hardware:
1. Remove the left chassis slide by using a #2 Phillips-head screwdriver.
2. Remove the left rack ear by unscrewing the three screws.
Figure 6 - 117: 2 - 34: Left chassis slide.