Installation guide

Acme Packet 6100 Hardware Installation and Maintenance Guide 1
1 Safety
Introduction
This chapter provides an overview of the recommended safety precautions for
installing the Acme Packet 6100.
Before you install your Acme Packet 6100, read this entire manual. This
document provides information intended to protect you and your Acme
Packet 6100 from experiencing any harm during the installation process. These
chapters also provide information that helps to keep your Acme Packet 6100
functioning properly and keep it from damage.
Safety and Regulatory Certifications
For information regarding safety and regulatory certifications applicable to the Acme
Packet 6100, refer to the Acme Packet Platforms Safety and Compliance Guide in
addition to this chapter.
General Safety Precautions
To ensure general safety, follow the safety precautions listed in this section.
Fan Module To avoid overheating the system, do not block the air inlets or the fan module,
or otherwise obstruct airflow to the system. Keep the area around the Acme
Packet 6100 clean and clutter-free.
System
Maintenance
Aside from the fan module, fan filter, power supply, and NIUs, there are no
user-serviceable parts inside the Acme Packet 6100. Only professionals trained
to maintain, adjust, or repair the Acme Packet 6100 may provide these services.
Fiber Optic Cable Looking into a fiber optic cable can cause eye damage. Never look directly into
the end of the fiber optic cables. Instead, use a fiber optic power meter to
determine if power is present.
Environmental
Specifications
Adhere to the stated environmental specifications for the Acme Packet 6100.
Using This Guide Read and understand all notes of warning and caution included in the Acme
Packet 6100 documentation. These warnings and cautions are designed to keep
you safe and protect the Acme Packet 6100 from damage.