Installation guide

Standoffs
SSM3 Module
78 Acme Packet 6100 Hardware Installation and Maintenance Guide
Figure 6 - 109. Location of the SSM3 Module Standoff Posts
Installing SODIMMs
The small outline dual in-line memory modules (SODIMMs) that expand the
memory functionality of the Acme Packet 6100 are installed on the NIU PCB.
The two SODIMM connectors are installed centrally on the NIU, one partially
above the other, fastened by industry-standard SODIMM socket connectors.
Figure 6 - 110. Location of the Installed SODIMMs
Each SODIMM is installed into the industry-standard socket on a 25-degree
angle into spring-loaded clips before being locked into place by downward
pressure on the SODIMM. A procedure describing the step-by-step
installation of the SODIMMs is presented in the next section.