Installation guide

Acme Packet 6100 Hardware Installation and Maintenance Guide 75
connector supports one side of the module while the other side of the SSM3
module rests on four standoff posts.
Figure 6 - 105. Location of the SSM3 Module
Pre-Installation
Guidelines
Please read and follow these pre-installation guidelines prior to replacing the
SSM3 module:
• The
SSM3 module can be installed only in the designated location.
• N
ote the installation location of the SSM3 module on the NIU PCB.
• G
round yourself and follow proper ESD grounding procedures.
• Rem
ove the SSM3 from the shipped packaging.
• In
stall the SSM3 according to the procedure below.
• Th
is upgrade should be performed during low-traffic periods or during
times of scheduled maintenance.
• Fo
llow industry-standard procedures to ensure ESD protection.
• Wh
en installing or removing an NIU card, move the card to an ESD-safe
location.
Caution Before handling a Acme Packet 6100 Transcoding NIU card,
follow the proper ESD grounding procedures. Failure to do so
could damage the NIU card and its components.