Installation guide

Acme Packet 6100 Hardware Installation and Maintenance Guide 73

5. Slide the card into the Acme Packet 6100. The physical interface card

circuit board slides into the guide rails in the NIU bay of the system

chassis.

Figure 6 - 102. Installing the NIU

6. Continue sliding the card into the chassis until the ejection levers catch the

chassis. At this point, the ejection levers will start to fold inward as the NIU

is inserted into the chassis.

7. Fold both ejection levers inward toward the card to complete the

nnection to the motherboard. Pushing the ejection levers inward draws

the physical interface card toward the system chassis and completes the

connection. The latches must engage to complete NIU insertion.

Figure 6 - 103. Locking the NIU to the Chassis