Installation guide

18 Acme Packet 6100 Hardware Installation and Maintenance Guide
grey locking handle, when moved from right to left, unlocks the power supply
from the chassis.
Handle to
Remove/Insert
Power Supply
Locking Tab to
Lock/Unlock
Power Supply to
Acme Packet
6100
Figure 2 - 30. Acme Packet 6100 AC Power Supply
AC Power Cords Acme Packet ships each AC-powered Acme Packet 6100 with one 2 meter, 3-
conductor 18 AWG power cord for each power supply. The power cord, fitted
with an IEC-60320 C13 connector, connects to the IEC- 60320 C14 receptacle on
the power supply.
DC Power The Acme Packet 6100 can be powered by central office –48 VDC operations
with a DC-DC supply. The handle on the front panel of the power supply is
used to insert and remove the power supply from the chassis. The locking
handle is used to lock/unlock the power supply from the chassis. A terminal
block on the DC power supply serves as the DC power interconnect.