Installation guide

Acme Packet 6100 Hardware Installation and Maintenance Guide 109
7 Specifications
Introduction
This chapter provides information regarding the physical, electrical,
environmental, and connector specifications of the Acme Packet 6100.
Safety and Regulatory Certifications
For information regarding safety and regulatory certifications applicable to the Acme
Packet 6100, refer to the Acme Packet Platforms Safety and Compliance Guide in
addition to this chapter.
Physical Specifications
.Acme Packet 6100
Specifications
This table lists the Acme Packet 6100’s physical dimensions and weight.
Table 7 - 18. Acme Packet 6100 Physical Specifications
Specification Description
Height 1.72” (4.37 cm) (1U)
Width 17.10” (43.43 cm) (+ mounting ear width: 19” (48.26 cm))
Depth 20” (50.8 cm) (+ mounting slide bar depth)
Weight approximately 20.5 lbs (9.30 kg), fully loaded
AC Power Supply
Physical
Dimensions
This table lists the physical dimensions and weight of the Acme Packet 6100
AC power supply.
Table 7 - 19. Acme Packet 6100 Physical Dimensions
Specification Description
Height 1.575” (4.00 cm)
Width 2.146” (5.45 cm)
Depth 13.26” (33.68 cm)
Weight 2lbs., 5 oz. (1.05 kg)
Important: This equipment is intended for installation in locations where
National Electrical Code (NEC) applies.