Installation guide
Acme Packet 6100 Hardware Installation and Maintenance Guide 105
Fan Speed Alarms The following table lists the fan speed alarm.
Table 6 - 10. Fan Speed Alarm
1
Information
Alarm Name
Alarm
ID
Alarm Severity
2
Causes
Example Log
Mes
sage
Graphic Display
Window Message
FAN STOPPED 65537 CRITICAL: any fan speed is operating at
<50%. Or
speed of two or more fans are
operating at >50% and
<75%.
MINOR: speed of one fan is operating
be
tween >75% and
<90%, while the other
two fans are operating at normal speed.
Fan failure. Fan speed: XXXX
XX
XX XXXX
where xxxx xxxx
xxxx is
the Revolu-
tions per Minute
(
RPM) of each fan
on the fan module
Fan stopped
1. If the fan speed alarm occurs, the Acme Packet 6100 turns the f
an speed up to the fastest possible speed.
2. The stated percentages are relative to the fan opera
ting speed. Fan speeds adapt to the load as necessary.
Environmental Sensor
Alarm
The following table lists the environmental sensor alarm.
Table 6 - 11. Environmental Sensor Alarm Information
Alarm Name
Alarm
ID
Alarm Severity Cause(s) Example Log Message
Graphic Display
Windo
w Message
ENVIRONMENTAL
SENSOR F
AILURE
65539 CRITICAL The environmental sen-
sor component cannot
de
tect fan speed and
temperature.
Hardware monitor fail-
ure! Unable to monitor
fan spee
d and tempera-
ture!
HW Monitor Fail
Power Supply Alarms The following table lists the power supply alarms.
Table 6 - 12. Power Supply Alarm Information
Alarm Alarm ID Alarm Severity Causes Log Message
Graphic Display
Windo
w Message
PLD POWER A
FA
ILURE
65540 MINOR Power supply A has failed. Back Power Supply A has
failed!
PLD POWER A
UP
65541 MINOR Power supply A is now present
a
nd functioning.
Back Power Supply A is
present!
PLD POWER B
FA
ILURE
65542 MINOR Power supply B has failed. Back Power Supply B has
failed!
PLD POWER B
UP
65543 MINOR Power supply B is now present
a
nd functioning.
Back Power Supply B is
present!
MAJOR: speed of two or more fans is
operating at >75% and <
90%. Or speed of
one fan is operating between >50% and
<
75% and the other two fans are
operating at normal speed.