Installation guide

Acme Packet 6100 Hardware Installation and Maintenance Guide 103
8. Place the air filter bracket behind the air filter, ensuring that the bracket
locks into place in the holes against the inside of the front bezel.
Figure 6 - 145. Replacing the Air Filter Bracket Behind the Air Filter
Note: Only the removable fan bezel has vent holes that require
cleaning.
Caution To prevent damage to the painted finish, do not use any
solvents or liquids to clean the perforated air inlets on the
front of the chassis.
9. Install the front bezel onto the Acme Packet 6100 by attaching the magnetic
bezel to one side of the chassis front and then pivot the other side of the
bezel until the other magnetic side attaches.
Figure 6 - 146. Replacing the Front Bezel
Alarms
The Acme Packet 6100 polls its hardware components to ensure they are
functioning properly. If it encounters a fault condition, it will report alarms in
these categories:
• Hardware temperature