Installation guide

Acme Packet 6100 Hardware Installation and Maintenance Guide 95
Caution To prevent damage to the optical lens, Acme Packet
recommends that the protective dust cover stay on the optical
transceiver port when the 10GigE physical interface card is not
cabled.
Removing an Optical
Transceiver
To remove the SFP+ transceiver from an NIU transceiver port:
1. Unplug all 10GbE fiber optic cables from the optical transceiver to be
replaced.
Figure 6 - 127. NIU Transceiver Port
2. Pull the bale clasp latch out and down. It will pivot downwards on its
hinge.
Figure 6 - 128. Lowering the FSP+ Bale Clasp Latch