User`s guide

25
S
ETTING THE
M
ONTEGO
II
AS THE
D
EFAULT
DEVICE
If you have more than one sound card in your system you will need to set
the Montego II as the default MIDI and audio device.
1. From the Windows NT Control Panel double-click the Multimedia
icon.
2. Click on the Audio tab. TBS Montego II Playback be chosen for
Playback and TBS Montego II Record should be chosen for Recording.
3. Now click on the MIDI tab.
4. The TBS Montego II MIDI should be selected.
5. Click on OK to save any changes.

Note that you may need to be logged in as the Administrator
to make any system changes in Windows NT.
T
ROUBLESHOOTING
The Montego II PCI card is assigned an IRQ by the BIOS. If you are having
an IRQ conflict, you will need to go into your BIOS setup to select which
IRQ is assigned to the slot in which you installed your Montego II PCI.
Please see your motherboard manufacturer’s documentation.
T
O CHECK THE RESOURCE SETTINGS FOR YOUR
M
ONTEGO
II
AND OTHER DEVICES
:
1. Click on Start, then go to Programs -> Administrative Tools ->
Windows NT Diagnostics.
2. Click on the resources tab. This will display a list of some of the
devices and resources that they use.