User`s guide

12 T
URTLE
B
EACH
S
YSTEMS
O
VERVIEW OF THE
S
TEPS
There is a specific sequence of steps that you need to take when installing
the Montego II sound card.
H
ERE IS AN OVERVIEW OF THE STEPS
:
1. Remove old sound card and drivers (if present.)
2. Install the Montego II sound card in the PCI slot.
3. Attach the audio cable to the CD-ROM drive (optional.)
4. Install the Montego II drivers and software.
5. Set the Montego II to be the default audio device if there is another
audio device in your system.

PRODUCT ID NUMBER
To install the software, you will need the Product ID
number. This number is located inside the CD-ROM case
that came with your Montego II.
R
EMOVING THE
O
LD
S
OUND
C
ARD
If your system has a sound card, you will need to remove its drivers and
then if possible, physically pull out the card or disable it. Generally,
drivers can be removed in the Add/Remove Programs option, located in
the Windows Control Panel. However, you should consult the sound card
manufacturer’s documentation for complete instructions on removal.
I
NSTALLING THE
B
OARD
To install the Montego II sound card in your system:
1. Turn off your PC and any connected peripherals and unplug the system.
2. Remove the mounting screws from your computer’s cover.
Remove the cover.