Product specifications

23
run the installation from the Montego II Home Studio CD Setup Menu.
(Run setup.exe on the CD then select Acrobat Installation.)
S
ETTING THE
M
ONTEGO
II H
OME
S
TUDIO AS THE
DEFAULT
A
UDIO AND
MIDI
DEVICE
If you have more than one sound card in your system you will need to set
the Montego II Home Studio as the default audio and MIDI device.
S
ETTING THE
M
ONTEGO
II H
OME
S
TUDIO TO BE THE
D
EFAULT
A
UDIO AND
MIDI D
EVICE
:
1. In the Windows 95 and 98 Control Panel double-click the Multimedia
icon.
2. Click on the Audio tab. Montego II Digital I/O Playback should be
chosen for Playback and Montego II Digital I/O Record should be
chosen for Recording.
3. Now click on the MIDI tab.
4. The Montego II Digital I/O MPU-401 MIDI should be selected.
5. Click on OK to save any changes.
T
ESTING AND
T
ROUBLESHOOTING
If the Montego II Home Studio or your system is not working properly,
there is probably a resource conflict in your system. This means that two
or more devices in the system are using the same resources. Resource
conflicts are fairly typical and are a normal part of the PC hardware
installation process. These conflicts can be easily resolved.
There are several possible types of conflicts that users experience when
installing the Montego II Home Studio:
Input/Output Port Address Conflict
Interrupt (IRQ) Conflict
Troubleshooting your system involves checking the current settings for
each of these common conflicts and trying new settings for the resources
that conflict. Note that you may need to try a number of different resource
configurations before all of the peripherals work together in your PC.