Product specifications

13
YES!
16-bit ISA slot – DO NOT USE!
8-bit ISA slot – DO NOT USE!
PCI slots – use this
t
yp
e!
3. Select an unused PCI expansion slot for the card. It should be near
another empty expansion slot which you’ll need to install the
breakout bracket. The second slot can be of any type because the
breakout bracket doesn’t actually plug into the motherboard. Also,
you should position the Montego II Home Studio card as far as
possible away from the
video card and power
supply!
4. Remove the two selected
expansion slot covers by unscrewing their
securing screws.
Save the screws to secure the Montego II Home
Studio board and breakout bracket to the
chassis later.
5. Align the card’s gold-striped edge connector with
the selected PCI expansion slot socket. With
a gentle back-and-forth rocking motion, press
the Montego II board firmly into the slot until it
snaps in place.
6. Secure the Montego II sound card to the
chassis with the expansion slot cover
screw you removed earlier.
7. Slide the breakout bracket into the other
selected slot and secure it with the
remaining expansion slot cover screw.
8. Connect the Montego II Home Studio sound card and the
breakout bracket together using the included connector cable.
One end should be attached to the S/PDIF Interface connector on the
Montego II sound board. The other end should be attached to the
Unscrew the
expansion slot covers
Gently press the Montego II card
into the slot