Product specifications

12 T

URTLE

EACH

YSTEMS

ERE IS AN OVERVIEW OF THE STEPS

1. Remove old sound card and drivers (optional.)

2. Install the Montego II Home Studio sound card and breakout bracket

in the computer.

3. Attach the audio cable to the CD-ROM drive (optional.)

4. Install the Montego II Home Studio drivers and software.

5. Set the Montego II Home Studio to be the default audio device if

there is another audio device in your system.



PRODUCT ID NUMBER

To install the software, you will need the Product ID

number. This number is located on the CD case that came

with the software.

EMOVING THE

OARD

If you have another sound card in your system that you are replacing with

the Montego II Home Studio, remove that sound card’s drivers from your

system, remove that sound card, then reboot the system to make certain

no errors occur and no old sound card drivers remain. For information on

removing the sound card and its drivers, refer to the appropriate

documentation.

NSTALLING THE

OARD

Here’s how to install the Montego II Home Studio sound card and

breakout bracket in your system.

1. Turn off your PC and any connected peripherals and unplug the

system.

2. Remove the mounting screws from your computer’s cover.

Remove the cover.