User`s guide

16 T
URTLE
B
EACH
S
YSTEMS
7. Slide the breakout bracket into the other
selected slot and secure it with the
remaining expansion slot cover screw.
8. Connect the Montego II Quadzilla sound
card and the breakout bracket together
using the included connector cable.
When connecting the cable between the
Montego II Quadzilla and the breakout
bracket, be sure that the pins are
aligned correctly. Misaligning these
pins WILL damage the Montego II
Quadzilla, the breakout bracket, and potentially your computer. Note
that the cable is shipped pre-attached to the Montego II Quadzilla
card.
Match key with
connector.