User`s guide

Acquiring in Automatic Mode from the Instrument Control Panel
Voyager
™
Biospectrometry
™
Workstation User’s Guide 6-43
6
6.6.3 Automatically Acquiring,
Evaluating, and Saving Spectra
To automatically acquire a spectrum:
1. In the Instrument Control Panel, open or create an
instrument settings file with the appropriate parameters.
See Section 6.6.2, Setting Instrument Settings for
Automatic Control Mode, for information.
2. Set Data Storage parameters as described in “Setting
Data Storage parameters” on page 6-14.
NOTE: You must specify a file name in the Data
Storage control page before acquiring in Automatic
Control mode.
3. In the Manual Laser/Sample Positioning control page,
select the Active Position to analyze.
4. To start acquiring, select Start Acquisition from the
Acquisition menu, or click .