User`s guide

Chapter 3 Preparing Samples
3-46 PerSeptive Biosystems
3
5. Select a Plate ID. The .PLT file and alignment information
associated with the Plate ID are automatically loaded.
Alternatively you can specify a new Plate ID and select
a .PLT file. For more information, see “Assigning Plate
IDs” on page 3-39.
6. Click OK.
The sample plate is loaded and aligned as needed. For
more information, see “How the system aligns a plate”
on page 2-40.
It takes a minute or two for the sample plate to reach
the correct position. While the sample plate is moving,
the Load/Eject Status dialog box displays messages
about the status of the hardware.