User`s guide

Chapter 2 Installing the Voyager™ Biospectrometry™ Workstations
2-30 PerSeptive Biosystems
2
2.6 Hardware Configuration
CAUTION
Do not alter the Hardware Configuration unless instructed
to do so by a PerSeptive Biosystems Technical
Representative. Altering these settings may cause your
Voyager Biospectrometry Workstation to function
improperly.
In this section This section describes:
• Vacuum configuration
• High voltage configuration
• Timed (Precursor) ion selector configuration
• Instrument configuration
• Laser configuration
• Digitizer configuration
Vacuum
configuration
To check the vacuum configuration:
1. In the Instrument Control Panel, select Hardware
Configuration from the Instrument menu.
2. Click the Vacuum tab to display the Vacuum configuration
page (Figure 2-16).