User's Manual

3. Operations and Others

3.1 Functionality

 Rover3 voyager controller shall be mounted on the tracker structure as per the

installation manual for its operation.

 Required connectors and peripherals shall be connected as per the installation

manual – PV+/PV-, Motor, Antenna.

 Release the E-Stop switch to turn the controller ON.

 Use BLE or Wired USB connection to communicate and configure with the

Rover3 controller as per the installation manual.

 After configuration of Zigbee Communication address as per corresponding

zone controller, Rover 3 controller can share data / status at user defined

intervals

3.2 Label & Warning*

Label shall be embossed on Enclosure LID. Below is the proposed content and post all

certification, Label will be embossed with certification symbols.