User's Manual

ManualsBrandsVoyager Tracker ManualsElectronicsROVER 3

1. General Information

1.1 System Overview

 An Intelligent tracker controller.

 24VDC motor control.

 Wireless Zigbee & BLE communication.

 System category – To drive a solar PV tracker structure through a driving

mechanism in accordance with the sun’s path during the day to achieve

maximum energy form the sunlight.

 Operational Status – Under Development

1.2 Points of Contact

 Information – Please read user manual carefully before installation.

 Help Desk – Please contact FTC Solar Inc for any kind of technical &

troubleshooting support @ www.ftcsolar.com.

1.3 Safety

Personal Protective Equipment (PPE) shall be worn in accordance with

project regulations. Standard PPE may include but is not limited to:

 Steel toed boots

 Hard hat

 Protective eyewear

 Visibility vests

 Gloves

All construction personnel must be trained to install and operate this

product.

840300-Voyager Controller

Summary of content (6 pages)

PAGE 1
840300-Voyager Controller 1. General Information 1.1 System Overview  An Intelligent tracker controller.  24VDC motor control.  Wireless Zigbee & BLE communication.  System category – To drive a solar PV tracker structure through a driving mechanism in accordance with the sun’s path during the day to achieve maximum energy form the sunlight.  1.2 Operational Status – Under Development Points of Contact  Information – Please read user manual carefully before installation.
PAGE 2
. System Summary 2.1 System Configuration – Rover 3 Rover 3 Voyager tracker controller is an intelligent solar tracker controller. It has a LiFePO4 battery inside as backup power, electronic PCB for computing sun algorithm, control the motor drive and charge the battery. 2.2 System Configuration – PV Modules Rover3 is connected with 2 No’s 60Wp series PV modules to charge the battery. 2.
PAGE 4
3. Operations and Others 3.1 Functionality  Rover3 voyager controller shall be mounted on the tracker structure as per the installation manual for its operation.  Required connectors and peripherals shall be connected as per the installation manual – PV+/PV-, Motor, Antenna.  Release the E-Stop switch to turn the controller ON.  Use BLE or Wired USB connection to communicate and configure with the Rover3 controller as per the installation manual.
PAGE 5
FCC Warning: ROVER 3 Model Name: 840300 -01 or 840300 -02 or 840300 -03 or 840300 -04 FCC ID:2A3I9-840300 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. © 2020 FTC Solar, Inc.