Owner's Guide

31
© 2021 Directed. All rights reserved.
The system keeps the engine running during short trips into the house
or convenience store. To perform Pit Stop:
1. With the engine running, set the parking brake and release the
foot brake.
2. Press the
AUX
AUX
button, the parking lights will turn on and the Re-
mote start LED and ON tones play on the remote control.
3. Turn the key to OFF, and remove it from the ignition, the engine
continues running for the programmed runtime.
4. Exit the vehicle and arm the alarm.
Note
For Pit Stop Mode on manual transmission vehicles follow
the directions in the Manual Transmission Start (MTS mode)
section with the door open.
MTS Mode (Manual Transmission Start)
When installed into a manual transmission vehicle, the system requires
that the MTS Mode is properly set when parking. If MTS Mode is not
properly set or is defeated after being properly set the system will not
start the engine.
1. With the engine running, place gear shifter in neutral position,
press the foot brake, then set the parking brake and leave the
engine running.
For Pit Stop Mode (to leave the engine running after arming),
open the driver door.
2. Release the foot brake. As long as the engine is running there is
no time limit to perform this step.
3. Within 20 seconds of foot brake release, press any command
button on the remote, after 20 seconds return to Step 2 (For Turbo
Timer Mode, press the optional dash mounted activation button
or send the Timer Mode command.