Owner's Guide
Table Of Contents
- Congratulations
- Important information
- Getting Started
- Responder LE 2-Way Remote Control
- Control Center
- Using your System
- Basic Commands (Direct Access)
- Advanced Commands: (Level 1)
- Advanced Commands: (Level 2)
- Advanced Commands: (Level 3)
- Advanced Commands: (Level 4)
- Remote Control Configuration
- Alarm Features
- Remote Start Features
- Remote and System Operations
- System Expansion Options
- Battery Information
- Battery Information (1-way)
- Glossary of Terms
- Patent Information
- Government Regulations
- Warning! Safety First
23
© 2021 Directed. All rights reserved.
Prepare the vehicle system for pairing:
1. Open at least one of the vehicle’s doors.
2. Turn the key to the ON position.
3. Within five seconds press and release the Control Center button
one time.
4. Within five seconds, press and hold the Control Center button.
The status LED will flash one time and the siren will chirp once to
confirm the system is ready for remote pairing.
5. Release the Control Center button and proceed below.
Prepare the remote control for pairing:
6. Enter programming by pressing and holding the
AUX
button for
eight seconds to access the Main Menu..
7. Press and hold the
AUX
AUX
button for one second, three transmit LED
flashes and three beeps indicate remote is ready to pair.
8. Press the
AUX
AUX
button.
9. Wait several seconds as the remote generates a security encryp-
tion and sends it to the Control Center. The siren chirps and the
LE 2-way remote control emits several tones to indicate Pairing is
complete (there is no audible confirmation with the 1-way).
If pairing is not successful press and release the
AUX
button once
and then repeat steps 7 and 8.
Pairing will exit if:
• Step 7 is not completed within 60 seconds
• The doors are closed
• The ignition is turned off.