Owner's Guide
Table Of Contents
- Congratulations
- Important information
- Getting Started
- Responder LE 2-Way Remote Control
- Control Center
- Using your System
- Basic Commands (Direct Access)
- Advanced Commands: (Level 1)
- Advanced Commands: (Level 2)
- Advanced Commands: (Level 3)
- Advanced Commands: (Level 4)
- Remote Control Configuration
- Alarm Features
- Remote Start Features
- Remote and System Operations
- System Expansion Options
- Battery Information
- Battery Information (1-way)
- Glossary of Terms
- Patent Information
- Government Regulations
- Warning! Safety First
22
© 2021 Directed. All rights reserved.
Car 2
Options: OFF, ON
The Responder LE and 1-way companion remote controls can control
two systems independently. When set to OFF, the Car Select feature
is not available. When set to ON the Car Select feature is enabled.
See ““Car Select” on page 37” for details on using a remote with
two systems.
Remote Beep
Options: ON, OFF, Triggers Only
The Responder LE emits a beep as confirmation of button presses and
command responses. When set to OFF, beeps are not emitted for any
operations except programming. For Triggers Only, beeps will only be
emitted for Full Trigger messages.
For 1-way companion remote control, OFF will delete all beeps ex-
cept when programming.
To save changes and exit the remote feature programming mode,
press the
AUX
button once and then press and hold. The transmit LED
shuts off confirming exit.
Sensor Adjust
To avoid unintended alarm triggers; it is recommenced that an autho-
rized Directed Dealer performs all sensor adjustments.
Remote Pairing Mode
The following instructions step you through the remote pairing opera-
tion of the Responder LE 2-way or 1-way companion remote.