Owner's Guide
Table Of Contents
- Congratulations
- Important information
- Getting Started
- Responder LE 2-Way Remote Control
- Control Center
- Using your System
- Basic Commands (Direct Access)
- Advanced Commands: (Level 1)
- Advanced Commands: (Level 2)
- Advanced Commands: (Level 3)
- Advanced Commands: (Level 4)
- Remote Control Configuration
- Alarm Features
- Remote Start Features
- Remote and System Operations
- System Expansion Options
- Battery Information
- Battery Information (1-way)
- Glossary of Terms
- Patent Information
- Government Regulations
- Warning! Safety First
18
© 2021 Directed. All rights reserved.
Advanced Commands: (Level 4)
Press and release the
AUX
button four times first, before pressing one of
the following command buttons.
Full Silent Arm*
Press and release
AUX
AUX
The alarm arms, doors lock, and the siren chirps and parking lights
flash four times. The Arm LED, one beep and four fault tones play to
confirm.
Start Valet**
Press and release
AUX
AUX
Enters (or if On, exits) Start Valet Mode. The Control Center LED turns
on and off accordingly. The Disarm LED and Valet beeps play (one for
ON, two for OFF) to confirm.
Defogger**
Press and release
AUX
AUX
Activates the vehicle Defogger circuit (if connected) while Remote Start
is activated and the parking lights flash three times. The Remote start
LED and one beep play to confirm. For convenience, the Defogger
circuit will also automatically activate 10 seconds after remote starting
if the temperature is below 55°F.
Note
Remote Start must be active to use this feature.
* See “Alarm Features” on page 24 for more details.
** This feature must be installed and turned on by an authorized Directed
dealer.