Owner's Guide
Table Of Contents
- Congratulations
- Important information
- Getting Started
- Responder LE 2-Way Remote Control
- Control Center
- Using your System
- Basic Commands (Direct Access)
- Advanced Commands: (Level 1)
- Advanced Commands: (Level 2)
- Advanced Commands: (Level 3)
- Advanced Commands: (Level 4)
- Remote Control Configuration
- Alarm Features
- Remote Start Features
- Remote and System Operations
- System Expansion Options
- Battery Information
- Battery Information (1-way)
- Glossary of Terms
- Patent Information
- Government Regulations
- Warning! Safety First
15
© 2021 Directed. All rights reserved.
Timer Start*
Press and release
AUX
AUX
Activates (or if ON, deactivates) Timer Start. The parking lights flash
quickly four times for ON and slowly four times for OFF. The Remote
Start LED and beeps play (one for on, two for off) to confirm.
Note
System needs to be armed or Timer Start will not start the
engine.
AUX 2
Press and release AUX
Activates (or if ON, deactivates) the AUX 2 output. The AUX LED and
ON tones or OFF tones play to confirm.
Arm Status
Press and hold the
AUX
button
The remote will generate an output using the LEDs and beeps/tones to
display the systems Arm Status since its last update message or com-
mand operation. It will report status via confirmation LEDs, beeps, and
tones as described in this section for Arm, Disarm, Valet Mode Arm,
Valet Mode Disarm, Sensor Silent Arm, Full Silent Arm.
* See “Advanced Start” on page 29 for details.