Owner's Guide
Table Of Contents
- Congratulations
- Important information
- Getting Started
- Responder LE 2-Way Remote Control
- Control Center
- Using your System
- Basic Commands (Direct Access)
- Advanced Commands: (Level 1)
- Advanced Commands: (Level 2)
- Advanced Commands: (Level 3)
- Advanced Commands: (Level 4)
- Remote Control Configuration
- Alarm Features
- Remote Start Features
- Remote and System Operations
- System Expansion Options
- Battery Information
- Battery Information (1-way)
- Glossary of Terms
- Patent Information
- Government Regulations
- Warning! Safety First
14
© 2021 Directed. All rights reserved.
Advanced Commands: (Level 2)
Press and release the
AUX
button two times first, before pressing one of
the following command buttons.
Sensor Bypass
Press and release
AUX
AUX
Performing the Sensor Bypass command will incrementally bypass sen-
sor operations and be confirmed as follows:
• Warn Away Bypass: The Parking lights flash two times. The Arm
LED, one beep and one fault tone play to confirm. Sensors will
be activated for Full Trigger levels of impact only.
• Warn Away & Full Trigger Bypass: The Parking lights flash three
times. The Arm LED, one beep and two fault tones play to con-
firm. Sensors will not be activated for any level of impact.
• Sensor Bypass Off: The Parking lights flash one time. The Arm
LED and one beep play to confirm. Sensors are fully operational.
Note
System needs to be armed to perform Sensor Bypass.
Perform arm command any time to turn Sensor Bypass Off.
Alarm/System Valet
Press and release
AUX
AUX
Enters (or if On, exits) Valet Mode. The Control Center LED turns on
and off accordingly. The Disarm LED and Valet beeps play (one for
ON, two for OFF) to confirm.