Owner's Guide
Table Of Contents
- Congratulations
- Important information
- Getting Started
- Responder LE 2-Way Remote Control
- Control Center
- Using your System
- Basic Commands (Direct Access)
- Advanced Commands: (Level 1)
- Advanced Commands: (Level 2)
- Advanced Commands: (Level 3)
- Advanced Commands: (Level 4)
- Remote Control Configuration
- Alarm Features
- Remote Start Features
- Remote and System Operations
- System Expansion Options
- Battery Information
- Battery Information (1-way)
- Glossary of Terms
- Patent Information
- Government Regulations
- Warning! Safety First
11
© 2021 Directed. All rights reserved.
Disarm
Press and release
AUX
AUX
The alarm disarms, doors unlock (if connected), and the siren chirps
and parking lights flash twice. The remote control Disarm LED and
beeps play to confirm. If Valet Mode* is ON, the doors unlock and
the Disarm LED and fault tones play.
An Alarm Report** will replace the disarm output if the alarm was
triggered; the siren will chirp four or five times, and the Disarm LED
and four or five fault tones play to alert of the report.
Remote Start
Press and release
AUX
AUX
Activates (or if ON, deactivates) the remote starter. The engine and
parking lights turn on and the Remote Start LED and ON tones play,
or the engine and parking lights turn off and the Remote Start LED
and OFF tones play to confirm. If a Remote Start configuration issue
prevents the engine from starting, a fault tone plays while the parking
lights flash a Remote Start Fault report*** to identify the fault.
AUX/Trunk
Press and hold AUX
The Trunk opens (if connected) when this button is pressed for two
seconds. The AUX LED and tones play to confirm.
* See “Manual Valet Mode” on page 35 for details.
** See “Trigger Zone Fault Report” on page 26 for details.
*** See “Remote Start Faults” on page 33 for details.
For Manual transmission vehicles see “MTS Mode (Manual Transmis-
sion Start)” on page 31
for more details.