Manualshelf

Install Guide

ManualsBrandsVoxx Electronics ManualsAutomotive915MHz Remote Start In Vehicle Transceiver Unit
123456789
3
CONTROL CENTER
CABLE
CONTROL
MODULE
Remote Pairing
Prepare the vehicle system to be Paired with a new remote
1.
Open
at least one vehicle door.
2.
Turn
the key to the ON position.
3. Within 5 seconds
press
and
release
the Control button on the Control
Center one time.
4. Within 5 seconds,
press
and
hold
the Control button on the Control
Center. The status LED begins flashing in single flash sequence and the
siren/horn sounds once to confirm the system is ready for remote pairing.
Release
the button.
5.
Locate
your remote control model below and
follow
the instructions.
System Pairing will exit if:
• The ignition is turned off
• The open door is closed
• 60 seconds lapses with no actions
Note
:
Make sure the remote to be paired with the system is set for the desired
Car 1 or Car 2 operation.