Owner's Manual

6
ACCESSORIES
Wireless Headphones
Each monitor includes a built-in dual channel infrared transmitter for use with the included wireless headphones. The wireless headphones
must be used within a direct line of sight from the screen. Infrared transmission, like visible light, travels only in a straight line.
How to Use the Wireless Headphones
When wearing the headphones, make sure to observe the “Left” and “Right” labels. The headphones must be oriented correctly in order to
receive the audio signal. Press the power button located on the side of the headphone. To switch between channel “A” (Driver’s side) and
channel “B” (Passenger side), slide the selector switch to the "A" or "B" position. Volume can be adjusted by rotating the wheel on the outside
of the channel select button. The headphones are designed to automatically turn off after approximately 3 minutes of no activity to help prevent
battery drain. If the headphones are not going to be used for an extended amount of time it is recommended to remove the batteries to prevent
damage of the headphones due to battery corrosion.
Wired Headphone Input
The System will allow you to use your personal headphones (not included) to listen to audio content. There are 3.5mm stereo headphone
output jacks located on the side of each monitor which can be used with most standard stereo headphones. The volume control of personal
headphones can be adjusted by selecting the volume icon and adjusting up/down.