BTunes tx User’s manual
Content ■ Before use………………………………………………….......…1 1. Overview ....................…………………………………...…....….1 2. Charging the BTunes tx……………………………………......….1 ■ Getting started…………………….…………………………....…2 1. Powering on/off the BTunes tx............................................................2 2. Pairing /Connecting.........................................................................2 1)How to enter pairing.........……….........................................
Thank you for choosing the BTunes tx. Please read this user’s manualcarefully before use. ■ Before use BTunes tx is a Bluetooth stereo transmitter. It can transmit music via Bluetooth from player, cellphone, PC or TV...to the Bluetooth receive devices such as Bluetooth receiver, Bluetooth headphone, Bluetooth speaker and so on. 1. Overview 1 3.5mm audio jack 2 Micro USB charging jack 3 LED indicator 4 MFB button 2.
■ Getting started 1. Powering on/off the BTunes tx Function Operation LED indicator Power on Long press MFB button about 2 seconds Blue LED on Power off Long press MFB button about 2 seconds Red LED on 2.
3)Connect with two devices simultaneously The general pairing procedures are as follows: 1) Make the BTunes tx pair and conncect with device one. 2) Make the BTunes tx enter pairing mode again and connect with device two. 3) Power on device one again, it will connect with BTuned tx automatically. 4) The BTuned tx has already connected with two device simultaneously. Remarks: The BTunes tx can remember 8 paired devices, when the paired devices over 8, the first paired device will be replaced.
4. LED indicator LED indicator The status of the BTunes tx Red and blue LED flash alternately Paring mode Blue LED flash once every 2 seconds Not connected with device Blue LED flash twice every 4 seconds Connected with device-SBC mode Blue LED flash twice every 4 seconds Connected with device-APtx mode Blue LED flash twice every 4 seconds Connected with device-APtx low latency mode Red LED instead of blue LED Battery low 5.
■ Care and maintenance Read the following recommendations carefully before using the BTunes tx. Following these you will be able to enjoy this product for many years. ◆ Keep it dry and don’t put it in the damp place to avoid the product’s internal circuit being affected. ◆ Keep the product away from direct sunlight or hot places. High temperatures will shorten the life of electronic devices, destroy the battery or distort certain plastic part. ◆ Don’t expose the product to cold areas.
■ FAQs 1.When the BTunes tx can not be powered on? a) Please charge the BTunes tx b) Please charge the battery about 5 minutes, and then the red LED will be ON. 2.When the BTunes tx can not be connected? a) Keep the BTunes tx and Bluetooth receiver within 1 meter. b) Keep the BTunes tx enter into pairing mode. 3. When can’t hear the sound ? a) Make sure the BTunes tx connect with player. b) Make sure the player is playing music. 4.
FCC NOTICE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
